Zapi COMBI AC1 Especificaciones descargar pdf (Pagina 12)

2=CA

3.4 DESCRIPTION OF CONNECTORS - STANDARD VERSION

A1 NLC Negative of main contactor coil.

A2 PLC , PEB Positive of main contactor coil and electromechanical brake coil.

A3 NBRAKE Output for driving the electromechanical brake coil; drives the load

to -Batt. Maximum current : 3A.

A4 NPC Negative of pump contactor coil.

A5 PPC , PEV Positive of pump contactor coil and lowering electrovalve coil.

A6 NEV Negative of the lowering electrovalve coil.

A7 CAN-L Low level CAN-BUS voltage I/O.

A8 NPOTB -Batt.

A9 ENCODER Incremental ENCODER (see chapter 3.6).

A10 ENCODER Incremental ENCODER (see chapter 3.6).

A11 HM Output for driving an hourmeter; when the hourmeter is active this

output provides a +Batt signal; 3A maximum current.

A12 -BATT -Batt.

A13 SR1 Speed reduction 1 input. Active low (switch opened).

A14 SR2 Speed reduction 2 input. Active low (switch opened).

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 61 62

Sin comentarios

Zapi COMBI AC1 Especificaciones Pagina 12