Zapi COMBI AC1 Especificaciones descargar pdf (Pagina 38)

2=CA!%

4.5 PARAMETER REGULATION: STANDARD VERSION

The following parameters can be modified:

1 ACC DELAY: determines the acceleration ramp.

2 RELEASE BRAKING: controls the deceleration ramp when the travel

request is released.

3 INVERSION BRAKING: controls the deceleration ramp when the direction

switch is inverted during travel..

4 PEDAL BRAKING: determines the deceleration ramp when the travel

request is released and the brake pedal switch is

closed.

5 SPEED LIMIT BRAKING: deceleration ramp when the pedal position is

changed but not completely released.

6 BRAKE CUTBACK: determines the deceleration ramp when the speed

reduction input becomes active and the motor slow

down.

7 MAX SPEED FORWARD: determines the maximum speed in forward direction.

8 MAX SPEED BACKWARD: determines the maximum speed in backward

direction.

9 CUTBACK SPEED 1: speed reduction when the cutback switch 1 is active.

10 CUTBACK SPEED 2: speed reduction when the cutback switch 2 is active.

11 CUTBACK SPEED 3: speed reduction when the cutback switch 3 is active.

12 H&S CUTBACK: speed reduction when the Hard&Soft switch is active.

13 FREQUENCY CREEP: minimum speed when the forward or reverse switch

is closed, but the accelerator is on a minimum

position.

14 MAXIMUM CURRENT: this changes the maximum current of the inverter.

15 BACKING SPEED: determines the speed in inching function.

16 BACKING TIME: determines the time of the inching function.

17 AUXILIARY TIME: determines the time that the truck is hold on the ramp

if the "stop on ramp" option is ON.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 61 62

Sin comentarios

Zapi COMBI AC1 Especificaciones Pagina 38