Zapi AC-2 Manual de usuario descargar pdf (Pagina 49)

AF2ZP0CE - ACE2 350/450 - User Manual Page - 49/83

Speed reduction when the cutback input is active.

18) FREQUENCY CREEP

Minimum speed when the forward or reverse switch is closed, but the

accelerator is on a minimum position.

19) MAXIMUM CURRENT

This parameter changes the maximum current of the inverter.

20) BRK SMOOTH

It gives a parabolic form to the deceleration ramp.

21) STOP BRK SMOOTH

Hz. It sets the level of frequency where the smooth effect of the deceleration

parabolic form ends.

22) AUXILIARY TIME

Time units value (seconds). For the encoder version, it determines the time

duration the truck is hold on the ramp if the STOP ON RAMP option is ON.

The following table shows the minimum / maximum programmable value for

each parameter. In the table is also present the parameters resolution.

PARAMETER UNIT MIN VALUE MAX VALUE RESOLUTION

ACCELERATION 0 (*) Sec. 0,3 10 0,1

INV. ACCEL 0 (*) Sec. 0,3 10 0,1

ACCELERATION 1 (*) Sec. 0,3 10 0,1

ACCELERATION 2 (*) Sec. 0,3 10 0,1

ACCELERATION 3 (*) Sec. 0,3 10 0,1

ACC PROF. FREQ 1 Hz 0 200 1

ACC PROF. FREQ 2 Hz 0 200 1

ACC PROF. FREQ 3 Hz 0 200 1

RELEASE BRAKING (**) Sec. 0,3 10 0,1

INVERS BRAKING (**) Sec. 0,3 10 0,1

DECELERATION BRAKING (**) Sec. 0,3 10 0,1

PEDAL BRAKING (**) Sec. 0,3 10 0,1

SPEED LIMIT BRAKING (**) Sec. 0,3 10 0,1

MAX SPEED FW Hz 5 200 1

MAX SPEED BW Hz 5 200 1

CUTBACK SPEED 1 %Max Sp 10 100 1

FREQUENCY CREEP Hz 0,6 4 0,1

MAXIMUM CURRENT % IMAX 0 100 1

BRK SMOOTH Num 1 5 0,1

STOP BRK SMOOTH Hz. 3 20 1

AUXILIARY TIME Sec. 0 10 0,1

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 82 83

Sin comentarios

Zapi AC-2 Manual de usuario Pagina 49