Zapi COMBI AC1 Manual de usuario descargar pdf (Pagina 17)

AMPSEAL VERSION

U VERY IMPORTANT

It is necessary to specify in the order the type of encoder used, in terms of

power supply, electronic output and n° of pulses for revolution, because

the logic unit must be set in the correct way by Zapi.

The n° of pulses revolution the controller can handle is given by the

second-last letter in the software release name (see 3.5).

4.2.6 Main contactor and key connection

- The connection of the main contactor can be carried out following the

drawing in the figure.

AMPSAAB VERSION

AMPSEAL VERSION

- The connection of the battery line switches must be carried out following

ZAPI instructions.

If a mechanical battery line switch is installed, it is strongly recommended

that the key supply to the inverter is open together with power battery line

(see picture below); if not, the inverter may be damaged if the switch is

opened during a regenerative braking.

- An intrinsic protection is present inside the logic when the voltage on the

battery power connection overtakes 40% more than the battery nominal

AEQZP0BA – COMBI AC1 - User Manual Page - 17/86

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 85 86

Sin comentarios

Zapi COMBI AC1 Manual de usuario Pagina 17