Zapi AC-2 Manual de usuario Pagina 61

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 72
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 60
ADEZP0DC - AC-2 FLASH INVERTER - User Manual Page - 61/72
9.4 Description of Console “PROGRAM VACC” function
This enables adjustment of the minimum and maximum useful signal level, in
either direction. This function is unique when it is necessary to compensate for
asymmetry with the mechanical elements associated with the potentiometer,
especially relating to the minimum level.
The two graphs show the output voltage from a non-calibrated potentiometer with
respect to the mechanical “zero” of the control lever. MI and MA indicate the point
where the direction switches close. 0 represents the mechanical zero of the
rotation.
The Left Hand graph shows the relationship of the motor voltage without signal
acquisition being made. The Right Hand Graph shows the same relationship after
signal acquisition of the potentiometer.
This function looks for and remembers the minimum and maximum potentiometer
wiper voltage over the full mechanical range of the pedal. It enables
compensation for non symmetry of the mechanical system between directions.
The operation is performed by operating the pedal after entering the PROGRAM
VACC function.
Flow Chart showing how to use the PROGRAM VACC function of the Digital
Console.
1) Opening Zapi Display.
AC2 ZAPI V0.0
48V 350A 00000
2) Press ENTER to go into the General Menu.
' % '
' ' '
3) The Display will show:
MAIN MENU
PARAMETER CHANGE
4) Press ROLL UP or ROLL DOWN button until
PROGRAM VACC appears on the display.
% ' '
% ' '
5) The Display will show:
MAIN MENU
PROGRAM VACC
6) Press ENTER to go into the PROGRAM VACC
routine.
' % '
' ' '
7) The Display will show the minimum and
maximum values of potentiometer wiper output.
Both directions can be shown.
VACC SETTING
4.8 4.8
Vista de pagina 60
1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 71 72

Comentarios a estos manuales

Sin comentarios