Zapi COMBI AC1 Manual de usuario descargar pdf (Pagina 49)

AESZP0BA – AC1 SSL SENSORED - FREE VERSION - User Manual Page - 49/73

12.4.4 Zapi menu “HARDWARE SETTINGS” functions list

Confidential documentation.

12.4.5 Zapi menu “SPECIAL ADJUSTMENTS” functions list

Note: the below set-up description is for skilled persons only: if you aren’t please

keep your hands off. To enter this Zapi hidden menu a special procedure is

required. Ask, this procedure, directly to a Zapi technician.

In the SPECIAL ADJUSTMENTS functions list, there are factory adjusted

parameters only.

1) ADJUSTMENT #01

(Factory adjusted). % value. This is the Gain of the first Current Sensing

Amplifier.

NOTE: keep your hand off this setting.

2) ADJUSTMENT#02

(Factory adjusted). % value. This is the Gain of the second Current Sensing

Amplifier.

NOTE: keep your hand off this setting.

12.4.6 Main menu “TESTER” functions list

The TESTER functions are a real time feedback measurements of the state of

the controller. It is possible to know the state (active disactive) of the digital I/Os,

the voltage value of the analog inputs and the state of the main variables used in

the motor and hydraulics control. Enter the home page in the hand-set diplay and

roll for the TESTER item.

1) BATTERY VOLTAGE

Voltage value with 1 decimal digit. Battery voltage value measured at the key

input CNB#1.

2) MOTOR VOLTAGE

Percentage value. It is the voltage generated by the inverter expressed in per

cent of the actual battery voltage. 100% means the sine wave width is close

to the actual battery voltage; 0% means the sine wave width is null.

3) VOLTAGE BOOSTER

Percentage value. It is the booster contribute to the voltage really supplied to

the motor expressed in per cent of the actual battery voltage. (Note: when

DC_LINK COMPENSATION is set ON, the VOLTAGE BOOSTER reading

will not match perfectly the booster setting because this latest one is

calculated respect to the nominal battery voltage; VOLTAGE BOOSTER is

expressed respect to the actual battery voltage).

4) FREQUENCY

Hz value with two decimal digit. This is the frequency of the sine waves the

inverter is supplying.

5) ENCODER

Hz value with two decimal digit. This is the speed of the motor measured with

the encoder and expressed in the same unit of the FREQUENCY reading.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 72 73

Comentarios a estos manuales

Sin comentarios

Zapi COMBI AC1 Manual de usuario Pagina 49

Comentarios a estos manuales

Relacionado con productos y manuales para Adaptadores E Inversores De Energía Zapi COMBI AC1